Safety Decal Locations - JLG ES1932 Operation & Safety Manual

Machine Controls, Indicators, and Operation
This machine may be equipped with ClearSky Smart Fleet Access Control. Using the
ClearSky Smart Fleet mobile app or web portal (remotely or locally), the machine can be
placed into restricted states that limit machine functionality for all operators.
By using this machine, the operator acknowledges Access Control functionality,
including restricted states, and accounts for it in their safe use plan.
Restricted states may include:
1. Speed Restricted — Machine drive speed is restricted to low speed and lift speed
is reduced.
2. Speed and Function Restricted — Machine drive speed is restricted to low speed
and the platform is restricted to a fully-lowered position. In this state, once the
platform is fully lowered, it is not permitted to leave that defined position.
3. Locked Out — Machine has been locked out and will not operate (including
engine start, if applicable).
Note: Restricted functionality may occur if the CS550 (ClearSky® LED Motion / Amber
Beacon) is damaged or removed. A protective cage is available through JLG.
Machines equipped with ClearSky Smart Fleet Access Control are also equipped with the
CS550. Refer to the ClearSky Smart Fleet and Beacons sections of this manual for more
information.

3.19 SAFETY DECAL LOCATIONS

Figure 6. ES1932i, ES1932 Decal Installation - 1 of 2
60
31221541 ES1932, ES1932i