JLG ES1932 Operation & Safety Manual page 43

Emergency Stop Switch
Note: Both the ground and platform emergency stop buttons must be set to ON in order to operate the
machine.
When power is directed to the platform from the ground control station, the platform emergency stop switch is
turned on by pulling the switch out (on), and is turned off by pushing the switch in (off). The two-position, red,
mushroom-shaped emergency stop switch functions to provide power to the platform control station and also to
turn off power to machine functions in the event of an emergency.
Always position emergency stop switch to off position (pushed in) when machine is
not in use.
Forward/Reverse/Lift/Lower Direction Arrow
This decal indicates the proper direction to mount the platform control box, with the
black arrow pointing to the front of the machine. The black/white arrow also indicates
the direction to move the joystick control per the lift/drive selector switch decal for the
lift and the drive select functions.
Horn
This push-button switch, when pressed, permits the operator to warn job site personnel
when the machine is operating in the area.
Indoor/Outdoor Operation Indicator
The Indoor (GREEN) indicator and the Outdoor (YELLOW) indicator displays which mode
the machine is currently set to operate in.
Note: ES1932i is rated for INDOOR USE only.
Indoor/Outdoor Operation Mode Switch
This button will toggle between the indoor/outdoor operation modes.
Note: ES1932i is rated for INDOOR USE only.
ES1932, ES1932i
Machine Controls, Indicators, and Operation
NOTICE
31221541
43