JLG ES1932 Operation & Safety Manual page 39

3.7.1 Ground Control Station Functions
Ground Emergency Stop Switch
Power is turned on by pulling the switch out, and is turned off by depressing switch. A
two-position, red, mushroom-shaped emergency stop switch, when positioned to ON with
the key selector switch positioned to ground, furnishes operating power to the ground
control station key switch. In addition, the switch can be used to turn off power to the
function controls in the event of an emergency.
Do not operate from ground control station with personnel in the platform except
in an emergency.
Ground/Platform/OFF Key Selector Switch
The key selector switch on the Ground Control Station functions to direct electrical power
to the desired control station.
With the switch turned to the ground position (1), power is supplied to the controls at
the Ground Control Station. When the switch is turned to the platform position (2),
power is supplied to the controls at the Platform Control Station. The switch should be
set to the off position (3) when not using machine or parking the machine overnight.
Hourmeter
The machine is equipped with an hour meter to indicate the number of hours the
machine has been operated.
Inverter ON/OFF Switch (If Equipped)
When switched on the inverter converts the DC voltage stored in the on-board batteries to AC voltage for use at
the AC receptacle outlet mounted on the platform rail.
ES1932, ES1932i
Machine Controls, Indicators, and Operation
WARNING
31221541
2
3
1
39