Table of Contents
Advertisement
User Responsibilities, Machine Preparation, and Inspection
16. Swing Motor and Brake - No evidence of damage.
17. Turntable Bearing - Evidence of proper lubrication. No evidence of loose bolts or
looseness between bearing and machine.
18. Hydraulic Pump and Reservoir - See Inspection Note.
19. Battery - Batteries have proper electrolyte level; cables tight; see Inspection Note.
20. Air Shutoff Valve (ASOV) (If Equipped) - See Inspection Note.
21. Fuel Tank - See Inspection Note.
22. Frame - See Inspection Note.
2.6
FUNCTION CHECK
To avoid serious injury, do not operate machine if any control levers or toggle
switches controlling platform movements do not return to the off position when
released.
To avoid a collision and injury if platform does not stop when a control switch or
lever is released, remove foot from footswitch or use emergency stop to stop
machine.
Perform the Function Check as follows:
1. From the ground control console with no load in the platform:
a. Ensure that all machine functions are disabled when the Emergency Stop
Button is pushed in.
b. Ensure all functions stop when the function switch is released.
c. Operate all functions and ensure proper operation.
d. Ensure proper operation of the manual descent controls, as described in
Section — Machine Safety System Override (MSSO) (CE Only)
32
WARNING
WARNING
31222411
of this manual.
800AJ HC3
Advertisement
Table of Contents
