Function Check - JLG B300001393 Operation And Safety Manual

Function Check

Perform the Function Check as follows:
1. From the ground control panel with no load in the platform:
a. Check that all guards protecting the switches or locks
are in place;
b. Operate all functions and check all limiting and cut-out
switches;
c. Check auxiliary power (or manual descent);
d. Ensure that all machine functions are disabled when
the Emergency Stop Button is activated.
2. From the platform control console:
a. Ensure that the control console is firmly secured in the
proper location;
b. Check that all guards protecting the switches or locks
are in place;
c. Operate all functions and check all limiting and cut-out
switches;
d. Ensure that all machine functions are disabled when
the Emergency Stop Button is pushed in.
3121615
SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
3. With the platform in the transport (stowed) position:
a. Drive the machine on a grade, not to exceed the rated
gradeability, and stop to ensure the brakes hold;
b. Check the tilt sensor alarm to ensure proper operation.
2-5