If operating (driving) machine with platform control station from ground, with rails
folded, keep at least 3 ft (1 m) distance from machine.
3.13.4
Platform with Narrow Access Rails
Note: This rail option is only available for ES1932 machines in the ANSI market. It may
be used in both indoor and outdoor configurations.
Note: Some platform accessories cannot be used when the rails are folded. Refer to
Options/Accessories Relationship tables for more information.
1. Move platform control box from front of machine to rear of machine.
2. Remove pins from top front corners of platform rails.
3. Slightly lift up top rails and pull back to clear detents. Replace pins to the holes
beneath the rails.
ES1932, ES1932i
Machine Controls, Indicators, and Operation
WARNING
31221541
53