JLG ES1932 Operation & Safety Manual page 86

Accessories
• LED Flashing Red: SkySense sensor is obstructed or damaged. Obstructions must be
removed and proper function verified. Damaged sensors must be replaced.
5.12.6 SkySense Alarm
Activation of SkySense is also signalled by an audible alarm that indicates SkySense
activity when reaching the warning or stop zones.
In the warning zone, the audible alarm will pulse and increase in frequency as the
machine moves closer to the object. In the stop zone, the alarm will sound a continuous
tone.
Additionally, when the machine is in the stop zone, the platform control panel audible
alarm will sound, indicating activation of the SoftTouch system. Reset the system by
releasing the trigger switch.
Audible SkySense alarms can be muted, although LEDs will continue to light.
5.12.7 Override Button
The yellow override button allows operators to bypass normal SkySense operation in
order to move closer to an object within the stop zone.
When the operator overrides SkySense via the override button to get closer to a work
surface, the machine will maintain creep speed and flash the appropriate indicator color
based on location in either the warning or stop zones.
5.12.8 SkySense Coverage Areas
Note: Sensor Cones shown are approximations for reference only.
86
Level One
31221541 ES1932, ES1932i