Towing - JLG ES1932 Operation & Safety Manual

3.15 TOWING

It is not recommended that this machine be towed except in the event of an
emergency, such as a machine malfunction or a total machine power failure.
If the machine must be towed, the machine is equipped with a push button to
electrically release the brakes. Look for the yellow button at the left rear of the machine.
1. Chock wheels or secure machine with tow vehicle.
2. Pull out the emergency stop switch and position the keyswitch to ground mode.
3. Press and hold the yellow button for one second to release the brakes. The alarm
will sound, then the pump motor will run for several seconds to release the
brakes.
4. To reset the brakes, push the yellow button again, recycle power to the machine,
or position the keyswitch to platform mode.
ES1932, ES1932i
Machine Controls, Indicators, and Operation
31221541
57