5.11 PLATFORM WORKLIGHTS
The Platform Worklights accessory consists of two 12V lights mounted to the platform
railings.
5.12 SKYSENSE®
5.12.1
General Information
SkySense is not intended to replace or reduce the need for the operator to be
aware of the environment around the machine. Hazards that will cause serious
injury or death may not be prevented or reduced by SkySense. The operator must
always look in the direction of travel, avoid power lines, avoid obstacles that could
strike the machine or persons in the platform, and follow all instructions on
machine placards and in this manual.
The operator must not rely on SkySense as a substitute for following the
instructions and warnings on machine placards and in this manual.
Read and understand these instructions in their entirety before operating the
machine.
ES1932, ES1932i
WARNING
NOTICE
31221541
Accessories
83