Panasonic KX-TDA50 Features Manual page 645

Feature Guide References
1.21.1 Station Message Detail Recording (SMDR)
RS-232C: NL Code
Specifies the NL (New Line) code for the printer or personal computer.
If the printer or personal computer automatically feeds lines with a carriage return, select CR (Carriage
Return). If not, select CR+LF (Line Feed).
Default
CR+LF
Value Range
CR+LF, CR
Programming References
None
Feature Guide References
1.21.1 Station Message Detail Recording (SMDR)
RS-232C: Word Length
Specifies the number of bits in each byte of a character.
When connecting the KX-TDA50 Maintenance Console to the PBX using an RS-232C cable, assign the
following values to the Serial Interface (RS-232C) port of the PBX:
Word Length: 8 bit, Parity Bit: None, Stop Bit: 1 bit
CAUTION
Do not use the following combinations:
• Word Length: 8 bit, Parity Bit: Space, Stop Bit: 1 bit
• Word Length: 8 bit, Parity Bit: Mark, Stop Bit: 2 bit
• Word Length: 8 bit, Parity Bit: Space, Stop Bit: 2 bit
Default
8 bit
Value Range
7 bit, 8 bit
Programming References
None
Feature Guide References
1.21.1 Station Message Detail Recording (SMDR)
4.17 Maintenance [11]
Feature Guide 645