Panasonic KX-TDA50 Features Manual page 43

at the end of the day.
Wrap-up
While logged-in, ICD group members can be allotted a specified amount of time after completing a call
(Wrap-up time) during which new calls will not be received by their extensions, allowing them to finish any
necessary paperwork before being eligible to receive new calls. When Wrap-up time expires, new calls can
be received at their extensions.
Extension users can also customize a flexible button to be used as the Wrap-up button, which allows users
to extend their Wrap-up time or make themselves temporarily unavailable (Not Ready). Pressing this button
again will return a user to Ready status.
[Example of Log-in, Log-out, Wrap-up, Not Ready, Ready]
Incoming call Incoming call
Extn. Extn. Extn.
101 102 103
Ready Ready Not Ready
Extn.
102
Logged-out
Conditions
• It is programmable whether the last remaining logged-in extension can log out.
• Log-in/Log-out Button
Any flexible button can be customized as a Log-in/Log-out button. Three types of buttons can be
programmed, as explained below.
Log-in/Log-out
Button Type
Group not
specified
Group is specified Log-in/Log-out button is
Incoming call
Extn. Extn. Extn.
104 105 106
Wrap-up Ready
Logged-in
Usage
Log-in/Log-out button is
pressed, followed by the
floating extension number
or Group Directory Number
(G-DN) button of the
desired group. Press
log-in/log-out of all groups.
pressed. The
preprogrammed group is
logged-in to/logged-out
from.
Waiting for call
Call
arrives
Answering a call
Call
completed
Finishing paperwork
Programming
A flexible button must be
customized as the Log-in/
Log-out button.
to
The desired group's
floating extension number
must be programmed
when creating the Log-in/
Log-out button.
1.2 Receiving Group Features
Ready
Wrap-up
button pressed
Not Ready
Wrap-up
Finishing paperwork/
temporary break
time expires
Wrap-up
button pressed
Wrap-up
Light Pattern
Red on
— —
When When
logged-out logged-in
Feature Guide
Off
43