Flexible Buttons - Panasonic KX-TDA50 Features Manual

1.18.2 Flexible Buttons

Description
Flexible buttons are customized through either system or personal programming. The following types of
flexible buttons are found on proprietary telephones (PTs), DSS Consoles, Add-on Key Modules, and/or
portable stations (PSs):
a)
Flexible CO buttons
b)
Flexible Direct Station Selection (DSS) buttons
c)
Programmable Feature (PF) buttons
[Button Usage]
Button
Single-CO (S-CO)
Group-CO (G-CO)
Loop-CO (L-CO)
Direct Station Selection (DSS) Used to call an extension with a one-touch operation. (→ 1.5.3 Intercom
Network Direct Station
Selection (NDSS)
One-touch Dialing
Group Directory Number (G-
DN)
Message
FWD/DND (External/Internal/
Both)*
Group FWD (External/Internal/
Both)
Account Code Entry (Account) Used to enter an account code. (→ 1.5.4.3 Account Code Entry)
Conference
Terminate
Used to access a specified CO line for making or receiving calls. (→
1.5.5.3 CO Line Access)
Used to access an idle CO line in a specified CO line group for making
calls. Incoming calls from CO lines in the assigned CO line group arrive
at this button. (→ 1.5.5.3 CO Line Access)
Used to access an idle CO line for making calls. Incoming calls from any
CO line arrive at this button. (→ 1.5.5.3 CO Line Access)
Call)
Used to access an extension at another PBX within the same network.
(→ 1.25.2.3 Network Direct Station Selection (NDSS) (KX-TDA5920
required))
Used to call a preprogrammed party or access a feature with a one-
touch operation. (→ 1.6.1.2 One-touch Dialing)
Used to access a specified incoming call distribution (ICD) group for
making or receiving calls. (→ 1.2.2.1 Incoming Call Distribution (ICD)
Group Features—OVERVIEW)
Used to leave a Message Waiting indication or call back the party who
left the Message Waiting indication. (→ 1.17.1 Message Waiting)
Used to set the FWD or DND feature for the extension. The feature is
applied to CO line calls, intercom calls, or both. (→ 1.3.1.1 Call
Forwarding (FWD)/Do Not Disturb (DND)—OVERVIEW)
Used to set the FWD feature for a specified ICD group. The feature is
applied to CO line calls, intercom calls, or both. (→ 1.3.1.1 Call
Forwarding (FWD)/Do Not Disturb (DND)—OVERVIEW)
Used to establish a multiparty conversation. (→ 1.13.1.2 Conference)
Used to disconnect the current call and make another call without
hanging up. (→ 1.10.6 Flash/Recall/Terminate)
1.18 Proprietary Telephone (PT) Features
Usage
Feature Guide 139