Panasonic KX-TDA50 Features Manual page 631

Value Range
0–15
Programming References
None
Feature Guide References
1.25.1.2 PBX Code Method (Access with PBX Code)
1.25.1.3 Extension Number Method (Access without PBX Code)
TIE—Additional Dial
Specifies the number to be added to the incoming called number in the place of the removed digits for TIE
line service.
Default
Not stored.
Value Range
Max. 8 digits (consisting of 0–9)
Programming References
None
Feature Guide References
1.25.1.2 PBX Code Method (Access with PBX Code)
1.25.1.3 Extension Number Method (Access without PBX Code)
DIL
For each CO line to which the DIL distribution is set, different DIL destinations can be programmed
depending on the time mode (day/lunch/break/night). Generally, DIL distribution is used for CO line calls
from analog CO lines. Tenant number and VPS trunk (CO line) group number can also be programmed for
each CO line.
Slot
Indicates the slot position of each CO line card (reference only).
Default
Current slot number
Value Range
Slot number
Feature Guide References
None
4.16 CO & Incoming Call [10]
Feature Guide 631