Portable Station [1-2] - Panasonic KX-TDA50 Features Manual

4.7 Configuration [1]
4.7.9

Portable Station [1-2]

Various portable station (PS) settings can be programmed. A maximum of 28 PS can be registered.
PS Registration and De-registration
A PS must be registered to the PBX by programming both the PBX and PS before it can be used.
Programming instructions of the PBX are given below; programming instructions of the PS are found in the
Installation Manual.
If desired, it is possible to de-register the PS later on.
Registration
Follow the steps below to register the PS.
1.
Specify the extension number of the PS, and then click Apply.
2.
Select the PS by clicking the Select cell and set it to ON.
More than one PS can be selected at a time (only the unregistered PS with an extension number
can be selected).
3.
Click Registration.
A dialog box will appear when the registration starts to execute.
4.
While the registration is executing, program the PS referring to "2.7.7 Connecting a Cell Station to
the Hybrid IP-PBX" of the Installation Manual.
5.
Click Confirm.
• If the registration is still in the process, the dialog box will show "Waiting: PS Registration".
Click Close.
• If the registration is successful, the dialog box will show "Registration Succeed".
If there are more PSs to be registered, click Continue to resume or Quit to terminate the
registration. If not, click Close.
• If the registration is unsuccessful, the dialog box will show "Registration Error". Click Close.
The registration will be terminated.
Once the PS is successfully registered, the status of the PS will update to show "Registered".
While the registration is executing, it is possible to abort registration by clicking Halt in the step 5 above.
However, if the registration is already completed, the registration cannot be aborted and the dialog box will
show "Registration Halt: NG". Click Continue and confirm the progress of registration.
De-registration
Follow the steps below to de-register the PS.
1.
Select the PS by clicking the Select cell and set it to ON.
More than one PS can be selected at a time (only the registered PS can be selected).
2.
Click De-registration.
• If the de-registration is successful, the dialog box will show "De-registration Succeed".
If there are more PSs to be de-registered, click Continue to resume or Quit to terminate the
de-registration. If not, click Close.
• If the de-registration is unsuccessful, the dialog box will show "De-registration Error". Click
Close. De-registration will be terminated.
Once the PS is successfully de-registered, the status of the PS will update to show "None".
334 Feature Guide