Panasonic KX-TDA50 Features Manual page 636

4.16 CO & Incoming Call [10]
Value Range
Disable (Busy Tone): Sends busy tone to the caller (However, a call through LCOT card will ring at the
original destination while the caller hears a ringback tone.)
Enable: Redirects the call to the intercept destination
Programming References
None
Feature Guide References
1.1.1.4 Intercept Routing
Intercept when the destination sets DND
Enables the Intercept Routing—DND feature to activate when the original destination is in DND mode.
Default
Enable
Value Range
Disable (Busy Tone): Sends busy tone to the caller (However, a call through LCOT card will ring at the
original destination while the caller hears a ringback tone.)
Enable: Redirects the call to the intercept destination
Programming References
None
Feature Guide References
1.1.1.4 Intercept Routing
Routing to Operator when the destination is not programmed
Enables the Intercept Routing—No Destination feature to activate when there is no destination for the call.
(The Intercept Routing—No Destination feature always works for the calls through LCOT card, even when
this feature is disabled.)
Default
Enable
Value Range
Disable (Reorder Tone): Sends the reorder tone to the caller
Enable: Redirects the call to an operator
Programming References
None
Feature Guide References
1.1.1.5 Intercept Routing—No Destination
636 Feature Guide