Connect; Connect-Rs-232C; Connect-Usb - Panasonic KX-TDA50 Features Manual

4.3 Connect

4.3 Connect
4.3.1 Connect—RS-232C
Connects to the PBX in Interactive mode through the serial RS-232C interface of the PBX.
The settings are as follows:
Setting
Port
NL Code
Baud Rate
Flow Control
Password
To connect using RS-232C
1.
From the Connect menu, select RS-232C.
2.
Enter the settings as required.
3.
Click OK.
4.3.2 Connect—USB
Connects to the PBX in Interactive mode through the USB port on the PBX, or a USB port (USB Module)
attached to a DPT.
To connect using USB
1.
From the Connect menu, select USB.
2.
Enter the password corresponding to the Programmer Code used to log on to the Maintenance
Console.
3.
Click OK.
290 Feature Guide
Values
COM1–COMx
CR, CR+LF
2400bps, 4800bps,
9600bps, 19200bps,
38400bps, 57600bps,
115200bps
None, Hardware
–
Description
Specify the number of the COM port
assigned to the PC's RS-232C interface.
Only available COM ports will be
displayed.
Specify the code to be sent to signify the
end of a line. Choose CR+LF.
Specify the speed of data transmission.
Specify whether the rate of data transfer
is managed by hardware or not. Choose
Hardware.
Enter the password corresponding to the
Programmer Code used to log on to the
Maintenance Console.