File; File-New; File-Open - Panasonic KX-TDA50 Features Manual
Hybrid ip-pbx
Hide thumbs
Also See for KX-TDA50:
- Pc programming manual (834 pages) ,
- Programming manual (726 pages) ,
- Feature manual (384 pages)
Table of Contents
Advertisement
4.2
File
4.2.1
File—New
Creates a new system data file, used to program the PBX in Batch mode. All settings are in their initial or
default state.
This option is only available at Installer level.
To upload the file created here to the SD memory card installed in the PBX, see "4.5.2 Utility—File Transfer
PC to PBX (SD Card)".
Note
Since selecting this option creates a blank system data file, uploading this file to the PBX will overwrite
all previous settings. Use only when necessary.
To create a new system data file
1.
From the File menu, select New.
2.
Click the appropriate model number.
3.
Select whether an MEC card is installed or not.
4.
Click OK.
4.2.2
File—Open
Opens a system data file previously saved on the PC, and enters Batch mode.
When opening a file created with an older version of the Maintenance Console (e.g. KX-TDA50
Maintenance Console version 1.1), you will be asked whether you want to convert the data for use with the
current version or not. Using the data without converting may result in some data being loaded to an
incorrect destination, and is not recommended.
For more details regarding file conversion, see "4.4.6 Tool—System data Convert".
If the file is not supported by the PBX (e.g. a system data file from an incompatible PBX), it will not be
opened. The only files that can be opened are files that were created by the Maintenance Console for a
supported PBX.
To upload a file opened here to the SD memory card installed in the PBX, see "4.5.2 Utility—File Transfer
PC to PBX (SD Card)".
To open a system data file
1.
From the File menu, select Open.
The Open dialog box will be displayed.
2.
Navigate to the folder containing the system data file you want to open.
3.
Select the file.
4.
Click Open.
If the file was created with an older version of the Maintenance Console, you will be asked if you want
to convert the data.
•
Click Yes to convert the data for use with the current version of the Maintenance Console.
4.2 File
Feature Guide
287
Advertisement
Table of Contents
