Quick Setup - Panasonic KX-TDA50 Features Manual

2.3 System Data Control
• The PBX will allow 16 simultaneous personal programming sessions, or one system or manager
programming session and 15 personal programming sessions.
• System Programming Password Level
To access system programming, a valid password must be entered. For more details, see Section 3.1
Introduction.
• Personal Programming Data Reset
A PT user can return settings made through personal programming (Preferred Line Assignment, Live
Call Screening Mode, etc.) to their default settings all at once.
Feature Guide References
2.2.6 Manager Features
3.3 PT Programming
User Manual References
3.1 Personal Programming
3.2 Manager Programming
3.3 System Programming
2.3.3

Quick Setup

Description
Basic PBX parameters can be programmed the first time the PBX is accessed with a PC using the KX-
TDA50 Maintenance Console software.
When the PBX is accessed with the Installer Level Programmer Code and default password (→ 2.3.1 PC
Programming), for the first time (i.e., accessed after the PBX's settings have been initialized or when the
PBX's settings are still set to their default values), Quick Setup will launch automatically. From here the
following basic parameters can be programmed as desired:
Item
Date & Time Set Year/Month/Date/
System
Password for
Installer
Operator &
Manager
234 Feature Guide
Parameter
The date and time set on the PC can be used by default.
Hour/Minute
4–10 characters Enter the system password for installer (→ 3.1 Introduction).
Extension Assign a PBX operator. (→ 2.2.5 Operator Features) This
Number extension will be the operator for all time modes, and is
automatically assigned manager status to perform manager
operations. (→ 2.2.6 Manager Features)
Description