Speed Dialing & Caller Id-Caller Id Modification [6-1-2] - Panasonic KX-TDA50 Features Manual

4.12 Feature [6]
CO Line Access Number + Telephone Number
Specifies the telephone number (including the CO Line Access number) or feature number assigned to the
System Speed Dialing number.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [, ] [Secret], P [Pause], and F [Flash])
Programming References
None
Feature Guide References
1.6.1.4 Speed Dialing—Personal/System
1.16.1 Caller ID
CLI Destination
Specifies the CLI destination (extension) to which incoming calls from the programmed telephone number
are routed. If a Caller ID Modification Table is being used, the modified number must match the telephone
number above (CO Line Access Number + Telephone Number) in order for the call to be routed correctly.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)
Programming References
4.16.2 DIL Table & Port Setting [10-2]—CLI for DIL—CLI Ring for DIL—Day, Lunch, Break, Night
Feature Guide References
1.1.1.3 Calling Line Identification (CLI) Distribution
1.16.1 Caller ID
4.12.2 Speed Dialing & Caller ID—Caller ID Modification [6-1-2]
The telephone numbers of incoming callers can be modified automatically by a Caller ID Modification Table,
and then recorded for calling back.
The PBX looks for incoming telephone numbers that begin with an area code programmed in the Caller ID
Modification Table assigned to that CO line group. If it finds such a code, it removes digits and adds a
number to the telephone number. If this modified telephone number is stored as a System Speed Dialing
number, the caller's name can be shown on a PT display and the call can be routed to a certain extension
(CLI destination). A maximum of 4 Caller ID Modification Tables, each containing 10 local/international call
data and 1 long distance code, can be programmed. Each CO line group can select a table for use. Select
the desired table from the Modification Table list.
600 Feature Guide