Quick Setup - Panasonic KX-TDA15 Features Manual

2.3 System Data Control
2.3.4

Quick Setup

Description
It is possible to set up the basic PBX parameters using a PC. When a PC accesses the PBX for the first time
with the Installer Level Programmer Code (→ 2.3.1 PC Programming), Quick Setup display will appear
automatically. The following items can be programmed as desired:
Item
Date & Time
System Password
Operator & Manager
Flexible Numbering
Feature
Extension
Operator
CO Access
Remote Maintenance
Number
Note that the programmable items may vary depending on the version of KX-TDA Maintenance Console
being used.
386 Feature Guide
Parameter
Year/Month/Date/Hour/
Minute
4–10 characters
Extension Number
1.
Type 1
(with )
2.
Type 2
(without )
From 101/from 201
0/9
0/1/9
Remote Maintenance
Dial Number
Description
The date and time set on the PC will be used.
Enter the system password for installer (→ 2.3.3
Password Security).
Assign the PBX operator to all time modes (day/
lunch/break/night) (→ 2.2.5 Operator Features). The
extension assigned as the PBX operators is
automatically allowed to perform manager operation
(→ 2.2.6 Manager Features).
If "Type 1 (with )" is selected, " " must prefix all
feature numbers (except access numbers) when an
extension user wants to use a feature.
[Example] Call Pickup feature number
Type 1 (with ): 41
Type 2 (without ): 41
For default of the flexible numbers, refer to the
[Flexible Numbering Table (available while a dial tone
is heard)] (→ 2.3.6 Flexible Numbering/Fixed
Numbering).
Determines the number from which default extension
numbers begin.
The feature number for Operator Call can be
selected.
The feature number for Idle Line Access can be
selected.
Enter the complete telephone number of the PBX
(including the country code). When necessary, this
number will be used to access the PBX from a remote
location for maintenance purposes.