Quick Setup - Panasonic KX-TDA200 Features Manual

2.3.4 Quick Setup

2.3.4 Quick Setup
Description
It is possible to set up the basic PBX parameters using a PC. When a PC accesses the PBX for the first time
with the Installer Level Programmer Code (® 2.3.1 PC Programming), Quick Setup display will appear
automatically. The following items can be programmed as desired:
Item
Date & Time
System Password
Operator & Manager
Flexible Numbering
Feature
Extension
Operator
CO Access
Remote Maintenance
Number
Note that the programmable items may vary depending on the version of Maintenance Console being used.
412 Feature Guide
Parameter
Year/Month/Date/Hour/
Minute
4–10 characters
Extension Number
1.
Type 1
(with )
2.
Type 2
(without )
KX-TDA30/
KX-TDA100/
KX-TDA200: from 101/
from 201
KX-TDA600: from
1001/from 2001
0/9
0/1/9
Remote Maintenance
Dial Number
The date and time set on the PC will be used.
Enter the system password for installer (® 2.3.3 Password
Security).
Assign the PBX operator to all time modes (day/lunch/
break/night) (® 2.2.5 Operator Features). The extension
assigned as the PBX operators is automatically allowed to
perform manager operation (® 2.2.6 Manager Features).
If "Type 1 (with )" is selected, " " must prefix all feature
numbers (except access numbers) when an extension user
wants to use a feature.
[Example] Call Pickup feature number
Type 1 (with ): 41
Type 2 (without ): 41
For default of the flexible numbers, refer to the [Flexible
Numbering Table (available while a dial tone is heard)]
(® 2.3.6 Flexible Numbering/Fixed Numbering).
Determines the number from which default extension num-
bers begin.
The feature number for Operator Call can be selected.
The feature number for Idle Line Access can be selected.
Enter the complete telephone number of the PBX (including
the country code). When necessary, this number will be
used to access the PBX from a remote location for main-
tenance purposes.
Description