VX3030 User's Guide
4.4
LEDs
Status LEDs Default Setting
There are three bicolor LEDs (Red/Green) on the front panel of the VX3030 3U VPX board.
CPU LED
COLOR
RED
GREEN
L1
ORANGE
OFF
RED
GREEN
L2
(1)
ORANGE
OFF
RED
GREEN
L3
(1)
ORANGE
OFF
The color of these LEDs may also be fixed by software through CPLD registers
(1)
CA.DT.A87-5e
L1, L2, L3
Figure 24: LEDs Front panel
Permanent error on subsystem
Internal power OK for subsystem
Reset state on subsystem
Blinking during CPLD I2C, SMI or COM
CPLD watchdog reset timer has expired
Normal operation mode
Factory test mode
Blinking during SATA activity in subsystem
Processor hot, may trigger processor performance limitations
Ethernet ETH connector valid on front panel
Ethernet ETH link directed to backplane
Blinking during ETH link activity in subsystem
Table 25: LEDs Description
DESCRIPTION
Physical I/O
Page 49