Front Panel Leds; Table 3-9: Health Led State; Table 3-10: Activity Led State - Kontron CP6930 User Manual

3.5.2 Front Panel LEDs

The front panel provides 24 LEDS for status indication for the standard fabric interfaces. The LED color is
green with the following states:
• Off link down
• On link up but no activity
• Blinking link up and activity
The front panel provides 8 LEDS for status indication for the SFP optical connectors. The LED color is green
with the following states:
• Off link down
• On link up but no activity
• Blinking link up and activity
Green Link/Activity LED for the CPU 10/100/1000Base-T Management port:
• Off link down
• On link up but no activity
• Blinking link up and activity
Amber/Grenn Speed LED for the CPU 10/100/1000Base-T Management port:
• Off 10Base-T
• On (amber) 100Base-Tx
• On (green) 1000Base-T
3.5.2.1 Health LED (Green LED)
The CP6930 Switch Board supports a Health LED mounted on the front panel. The following states are possi-
ble:
Table 3-9: Health LED state
LED state
ON Normal state when board is in operation.
Short Blinking "Health Error" sensor asserted
3.5.2.2 Activity LED (Green LED)
The position of this LED is near the bottom handle beside the health LED. The LED is not used
Table 3-10: Activity LED state
LED state
off
Description
Default setting (LED not used)
27
Description
www.kontron.com
Functional Description
CP6930 User Guide