Set Up The Snap To Whiteboard Feature - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80

Introduction

Set up the Snap to Whiteboard feature

The Snap to Whiteboard feature extends the speaker
tracking functionality.
A speaker track camera tracks the person talking
automatically, and normally the camera moves to cover
the talking person only. With the Snap to Whiteboard
extension enabled, the camera also covers the
whiteboard when the person talking stands next to it.
A system administrator must define the whiteboard
position using the wizard on the Touch controller.
Prerequsites
• Camera that supports speaker tracking
• MX700 and MX800 with dual camera, or
• SX80 with SpeakerTrack 60 camera
set to Auto
• Cameras > SpeakerTrack > Mode
Since Snap to Whiteboard is an extension to speaker
tracking, tracking must be swithched on when using Snap
to Whiteboard.
D15328.01 SX80 Administrator Guide CE8.0, NOVEMBER 2015.
Configuration Peripherals Peripherals
(page 1 of 3)
Preparations
d
Whiteboard posistion
The whiteboard must be placed accross the room from
the camera, as shown in the illustration.
When configuring the feature, you need to know
the accurate distance between the camera and the
whiteboard.
Maintenance
Speaker track camera
Accurate distance (d)
between camera
and whiteboard
Whiteboard
Speaker position
The Sound tracking area is from half the whiteboard and
up.
Thus, the person presenting on the whiteboard must stand
upright next to the whiteboard. He or she cannot move
about in the room.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
46
Administrator Guide
System settings Appendices
Sound
tracking
area