Table of Contents
Advertisement
Cisco TelePresence Video Systems
Introduction
Provisioning set-up
(When using a provisioning system)
If in doubt for any of the parameters below, contact your provi-
sioning system provider.
See the administrator guide for your product, to find more
information about the individual provisioning settings.
Select provisioning infrastructure
1. Go to the
Setup
tab, and click Configuration.
2. Open the
Provisioning
settings from the left column.
3. Select a provisioning infrastructure from the
down list:
• TMS – Cisco TelePresence Management System (Not avail-
able for SX10)
• VCS – Cisco Video Communication Server
• CUCM – Cisco Unified Communications Manager
• Auto - The system starts provisioning by first trying VCS,
then TMS and finally CUCM.
• Edge - CUCM via Expressway
If you select Off, all configurations must be set manually.
If you are changing a value setting,
you have to always click
save
to confirm the change.
D15318.03 Video Systems Getting Started Guide CE8.2, JUNE 2016.
User interfaces
Web interface
Web interface
Set the required provisioning parameters
Which parameters to set depend on which infrastructure was selected.
TMS
1. It may be required to authenticate the video system with
Cisco TMS. If so, enter
respective input fields.
2. Enter the IP address or DNS name of the Cisco TMS server
in the
Address
heading.*
Mode
drop
3. Enter the
sponding input field.
VCS
1. It may be required to authenticate the video system with
the Cisco VCS. If so, enter
respective input fields.
2. Enter the IP address or DNS name of the Cisco VCS in the
Address
3. Enter the SIP
ing input field.
Have a look at the
information about VCS provisioning.
Setup assistant
LoginName
and
Password
input field under the
ExternalManager
Path
to the provisioning service in the corre-
LoginName
and
Password
input field under the
ExternalManager
heading.*
Domain
for the Cisco VCS in the correspond-
Cisco VCS provisioning
appendix for more
15
Touch
Unified Communications Manager
Enter the IP address or DNS name of the CUCM provisioning
server in the
Address
input field under the
in the
heading.*
You can find more details about setting up CUCM provisioning
in the
Administering CE endpoints on CUCM
CUCM via Expressway**
Upon ordering the CUCM via Expressway service, you have
received a username, password, and domain name.
1. Enter the username in the
2. Enter the password in the
in the
3. Enter the domain name in the
ExternalManager
heading.
In some cases, you must manually enter the Expressway
address. Enter the address you have received upon ordering
in the
Address
input field under the
* The DHCP server can be set up to provide the External Manager address
automatically (Option 242 for TMS; Option 150 for UCM). Any input set up
here overrides the setting provided by DHCP.
**For CUCM via Expressway to show up as provisioning option for your
video system, you must have the encryption option key installed.
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
Getting Started Guide
Appendices
ExternalManager
guide.
LoginName
input field.
Password
input field.
Domain
input field under the
ExternalManager
heading.
Advertisement
Table of Contents
