Wi-Fi Settings - Barco CX-50 Gen2 Installation Manual

Image 6–16 Quality score
• Green: >68
• Orange: 35 – 68
• Red: 0 – 34
Source (camera to Base Unit) is requested frame rate. This frame rate results in a destination frame rate
between Base Unit and app or Button.

6.10 Wi-Fi settings

WARNING: It is not allowed to operate the Base Unit outside its intended geographical region.
About Wi-Fi
A connection with the Base Unit can be made via a wireless connection. A fixed wireless IP address is used to
establish the connection.
An overview of the current settings is given when Wi-Fi Settings is selected and Access Point is enabled.
Image 6–17 Wi-Fi settings
The Access Point Settings and the Wireless Client settings can be enabled or disabled after clicking Edit
settings.
Check the check box next to Enable.
Checked: access point settings are enabled. All current settings can be changed.
Unchecked: access point settings are disabled.
CX-50 Gen2 Configurator
R5900120 /01 CX-50 Gen2 81