Barco CX-50 Gen2 Installation Manual page 50

CX-50 Gen2 Installation
Image 4–22
To benefit from the SmartCare program, your device should be registered to XMS Cloud. Copy your
device token by clicking on the copy icon next to the token.
Click on the link to start the registration procedure.
Follow the procedure in "Registration to XMS Cloud", page 51.
10. Overview page
Image 4–23
Gives an overview of the current configuration.
Click Finish configuration. When your device is connected to the internet and firmware update was set to
automatic, a software check and an update will be executed. The Configurator starts automatically with a
message that your device is configured.
50 R5900120 /01 CX-50 Gen2