Fully Equipped, Audio Only Or Camera Only Conference Room - Barco CX-50 Gen2 Installation Manual

CX-50 Gen2 Installation
Image 4–7
Video and audio is transferred via the USB cable to the display.
When the display is connected via USB Type-C port and that display has extra USB Type-C port(s),
these ports can be used to connect a camera and/or an echo canceling speakerphone.
Next to that, when the display is be able to output 90W or 100W (20V/5A or 20V/45A) via the USB
Type-C connection, the Base Unit can be powered via that way.
When an HDMI and USB Type-C connection is made between the Base Unit and the display, the
HDMI connection has priority.
Dual display connection
1. Connect one display to the HDMI out of the Base Unit.
Image 4–8
2. Connect the second display via USB to the backside USB Type-C port of the Base Unit.
4.11 Fully equipped, Audio only or Camera only
conference room
Fully equipped conference room
The following components should be available in the room:
• USB camera must support at least a resolution of 720p.
38 R5900120 /01 CX-50 Gen2
USB-Type C TM
HDMI OUT