Peripherals; Wi-Fi Settings - Barco CX-20 Installation Manual

6.8 Peripherals

Overview
ClickShare Conference allows you to connect the room speakerphone, microphone and camera wireless to
your laptop and use the better equipment of the room in your video conferencing call.
The Peripheral page gives an overview of the connected devices and their status.
How to get
1. Log in to the Configurator.
2. Click Display & Audio → Peripherals.
An overview of the status of the Speakerphone Device, microphone and speaker, and Camera device is
given.
Image 6–15 Peripherals

6.9 Wi-Fi settings

WARNING: It is not allowed to operate the Base Unit outside its intended geographical region.
About Wi-Fi
A connection with the Base Unit can be made via a wireless connection. A fixed wireless IP address is used to
establish the connection.
The transmission power of the wireless signal can be reduced.
An overview of the current settings is given when Wi-Fi Settings is selected and operational mode is Access
Point.
CX-20 Configurator
R5900102 /02 CX-20 69