Wi-Fi Settings, Access Point Settings - Barco CX-20 Installation Manual

CX-20 Configurator
About
The operational mode of the Wi-Fi setting can be set in 3 different modes:
• Access point
• Wireless client
• Off
Change operational mode
1. Log in to the Configurator.
2. Click Wi-Fi & Network → Wi-Fi Settings.
Image 6–16 Wi-Fi settings
3. Select the operational mode by clicking on the drop down and selecting the desired option.
The following options are possible.
• Access point
• Wireless client
• Off
4. To change the Access Point settings, select Access Point.
For more detailed information, see
5. To change the Wireless Client Settings, select Wireless Client.
For more detailed information, see

6.10 Wi-Fi settings, Access Point settings

How to change
1. Check the check box next to Enable.
Checked: access point settings are enabled. All current settings can be changed.
Unchecked: access point settings are disabled.
2. If desired, enter a new Wi-Fi passphrase and confirm this Wi-Fi passphrase.
72 R5900102 /04 CX-20
"Wi-Fi settings, Access Point settings", page 72
"", .