Gen2 Installation; Installation Methods For The Base Unit; Guidelines For Clickshare Conference System Installation - Barco CX-50 Gen2 Installation Manual

CX-50 Gen2 Installation

4.1 Installation methods for the Base Unit

For optimal performance, install the Base Unit close to the display and avoid obstacles between the
Base Unit and the Buttons.
Make sure not to install the Base Unit in a metal enclosure.
Physical installation
The Base Unit can be installed in different ways in a meeting room.
• Table mount
• Wall mount
A Kensington lock is foreseen on one side of the Base Unit.
WARNING: Ceiling mount is not allowed !
Standalone or network integration
The Base Unit can be use as standalone unit or integrated in a corporate network.
• Out-of-the-box use
• Out-of-the-box use with Ethernet link
• Integration in enterprise network
• Dual network integration
• Integration in dedicated enterprice network
Conferencing room setup
• Full conferencing room setup
• Audio only conferencing room setup
• Video only conferencing room setup
4.2 Guidelines for ClickShare Conference system
installation
Overview
• Keep your Base Unit up to date. For an optimal experience and to assure the security of the overall system
free updates are multiple times available.
• It is recommended to connect the Base Unit to the network (wired Ethernet connection or wireless
connection) for the best user experience for users, guests, employees and administrators. By doing so,
both guests and employees can make use of BYOD services (e.g. AirPlay, Google Cast and Miracast) but
also the ClickShare Apps without disconnecting from the wireless network or losing their internet
connection.
• It is recommended to use a direct connection between the Conferencing Button and the Base Unit for high
quality and low latency wireless conferencing.
• Place the Base Unit in an open emplacement and avoid installing a metallic shell.
• For an optimal user experience, both ClickShare and BYOD services such as AirPlay, Google Cast or
Miracast, have different implementations for presence and proximity detection. To take full advantage of
these mechanisms, we strongly advise to install the ClickShare Base Unit inside the meeting room,
physically close to the display and not in a closed cabinet.
• Always connect your camera and/or audio device via USB to the Base Unit.
• For optimal security, it is strongly advised to change the default passwords.
30 R5900120 /01 CX-50 Gen2