Power Connection - Barco CX-50 Gen2 Installation Manual

2
3
Image 4–10
2. Connect your HDMI source with an HDMI cable to the HDMI input of the HDMI adapter (2)
3. The spare USB Type-C

4.18 Power connection

About power connection
The Base Unit can be powered in two ways:
• Via a 19VDC network adapter
• Via USB Type-C TM
When both connections are made, the external power adapter has the priority.
About the power adapter
WARNING: Use a power cord which complies to local regulations. If not included in the box, contact
your local dealer for a correct power cord.
The Base Unit is intended to be powered by the Barco supplied power adapter ATM090T-A190, with power
specifications: input 100-240V, 1.2A 50/60Hz and output 19 VDC 4.74A.
Image 4–11
Via the power adapter
1. Plug the barrel connector of the power adapter into the power input of the Base Unit.
2. Slide a power input adaptor piece (US, AU, IN, CH, EU or UK) on the power adapter of the ClickShare until
it clicks. Use the one
which is applicable in your country.
3. Connect the power cable to the wall outlet.
1
TM port can be used for wired roomdock.
CX-50 Gen2 Installation
R5900120 /01 CX-50 Gen2 43