On-Screen Id Information - Barco CX-50 Gen2 Installation Manual

CX-50 Gen2 Configurator
Click Start configuration.
Fill out the necessary items and click Next to continue.
To return to the previous step, click on Back.
For more information about a specific topic, see one of the following topics.
The ClickShare Configuration Wizard can be started at any time to change the configuration just by clicking on
ClickShare Configuration Wizard at the left bottom of each screen or on Lauch configuration wizard on the
start page.
Firmware Firmware update – automatically
Firmware update – manually
Personalisa- Language on-screen text
tion
Meeting room name, location name and
welcome message
System Time zone, manual time setup
Use NTP
Security Level settings
Password ClickShare Configurator password
Network Frequency band, channel Wi-Fi passphrase
SmartCare for Register your device to get the SmartCare
ClickShare package

6.3 On-Screen ID information

About device identification
The following items can be set:
• On-Screen language. Independent from the Configurator language.
• Meeting room name
• Location of the meeting room
• Welcome message to be displayed in the meeting room
• Show the network information
- Checked: LAN information such as wired IP address is displayed. Also the Wi-Fi IP address and SSID
are displayed.
- Not checked: no LAN nor Wi-Fi information is displayed (default setup)
• Enable theater mode
- Checked: the entire screen is used to share content. No status bar displayed anymore. The status bar
pops up to show status changes, notifications, pin code etc. and fades out again. With touch screens a
'tag' enables you to bring up the status bar to start annotation and blackboarding.
- Not-checked: Status bar remains on the screen.
72 R5900120 /01 CX-50 Gen2
See "Firmware Update", page 114
See "On-Screen ID information", page
See "On-Screen ID information", page
See "Date & Time setup, manually", page
104.
See "Date & Time setup, time server", page
106.
See "Security, security level", page
See "Security, passwords", page
See "Wi-Fi settings, Wireless Client", page
84.
See "Registration to XMS Cloud", page
72.
72.
100.
101.
51.