First Startup Of The Base Unit - Barco CX-50 Gen2 Installation Manual

Image 4–13 Wired roomdock connection
Before Wired Roomdock can be used, configure it in the Configurator. Go to Display & Audio and
select Input. For more info, see

4.20 First startup of the Base Unit

Workflow
1. First time boot of the Base Unit.
The following screen is seen on the connected monitor.
Image 4–14 Onboarding screen
or
"Display setup, Inputs", page 79
CX-50 Gen2 Installation
R5900120 /01 CX-50 Gen2 45