Updating The Cx-50 Gen2 Firmware - Barco CX-50 Gen2 Installation Manual

Firmware updates

7.1 Updating the CX-50 Gen2 firmware

When starting up the device for the first time a software update is necessary. This update can only
be done via the network.
About Firmware updates
There are different ways to update the Base Unit software:
• automatic update when connected with the network or your device is configured in XMS cloud.
• via the Configurator, for more information, see
• by copying the software on a USB stick
To update the Base Unit software by copying the software on a USB stick
1. Download the latest version of the firmware from Barco's website, www.barco.com/clickshare. Click on
Support and select the update firmware button of your device type.
2. Unzip the zip file.
3. Copy the ENC file to a USB stick.
You can have multiple firmwares for multiple device types on the same stick.
4. Insert the USB stick into the USB port at the front of the Base Unit.
5. Follow the instructions on the meeting room screen.
6. When the on-screen message indicates that the process is finished, remove the USB stick.
The Base Unit reboots.
120 R5900120 /01 CX-50 Gen2
"Firmware Update", page 114.