Barco С 5010S User Manual
Hide thumbs Also See for С 5010S:

Advertisement

Quick Links

CX-50
Model: C 5010S, R9861600D01C
User guide
ENABLING BRIGHT OUTCOMES

Advertisement

Table of Contents
loading

Summary of Contents for Barco С 5010S

  • Page 1 CX-50 Model: C 5010S, R9861600D01C User guide ENABLING BRIGHT OUTCOMES...
  • Page 2 Barco NV Beneluxpark 21, 8500 Kortrijk, Belgium www.barco.com/en/support www.barco.com Registered office: Barco NV President Kennedypark 35, 8500 Kortrijk, Belgium www.barco.com/en/support www.barco.com...
  • Page 3 Barco. If the purchaser or a third party carries out modifications or repairs on goods delivered by Barco, or if the goods are handled incorrectly, in particular if the systems are operated incorrectly or if, after the transfer of risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid.
  • Page 4 ClickShare applications (each a “Barco ClickShare Product”). • Term The Software can be used under the terms of this EULA from the date of first use of the Barco ClickShare Product, for as long as you operate such Barco ClickShare Product. •...
  • Page 5 • Retention of data Barco right to use and retain Functional Information (section 10.2 of the EULA) shall survive the term of this EULA. BARCO END USER LICENSE AGREEMENT By accepting these terms (through tick box or other mechanism designed to acknowledge agreement to the...
  • Page 6 You may own the carrier on which the Software is provided, but the Software is owned and copyrighted by Barco or by third party suppliers. Your license confers no title or ownership and is not a sale of any rights in the...
  • Page 7 Software. You agree to install any maintenance releases to address bugs or security issues in the Software if the same are being provided to you. Barco will keep you informed as of when earlier versions of the Software are no longer serviced.
  • Page 8 6.4 Remedy. If the breach is not cured within the applicable remedy period (or cannot be cured at all), Barco shall have the option (i) to cause you to procure such additional licenses required as per the actual usage;...
  • Page 9 (especially for components that you provide or control). Barco disclaims any liability for any data not provided by Barco, or any use of the Software outside the intended use as per this License Agreement or an applicable data processing annex.
  • Page 10 ( http://www.barco.com/en/about-barco/legal/privacy-policy/clickshare-app). Via the Software, Barco may gather technical information about (i) the functioning and the functionality of the products which are connected through the Software, and/or (ii) as provided by you or generated by your use of the Software (“Functional Information”).
  • Page 11 SOURCE_SITE PACKAGE VERSION https://c-ares.haxx.se/download c-ares 1.15.0 http://snapshot.debian.org/archive/debian/20190513T145054Z/pool/ ca-certificates 20190110 main/c/ca-certificates http://collectd.org/files collectd 5.7.2 https://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/crda.git/snapshot 4,14 crda cryptsetup https://cdn.kernel.org/pub/linux/utils/cryptsetup/v2.0 2.0.6 http://dbus.freedesktop.org/releases/dbus dbus 1.12.16 dejavu-fonts http://downloads.sourceforge.net/project/dejavu/dejavu/2.34 2.34 http://bootlin.com/pub/mirror devmem2 dhcp http://ftp.isc.org/isc/dhcp/4.3.6 4.3.6 dnsmasq http://thekelleys.org.uk/dnsmasq 2.79 https://github.com/dosfstools/dosfstools/releases/download/v4.1 dosfstools dropbear http://matt.ucc.asn.au/dropbear/releases 2018.76 https://get.videolan.org/dvblast/3.4 dvblast e2fsprogs https://cdn.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/v1.44.5 1.44.5...
  • Page 12 SOURCE_SITE PACKAGE VERSION grub https://github.com/coreos/grub/releases 2.02-beta2 gst1-libav http://gstreamer.freedesktop.org/src/gst-libav 1.14.4 gst1-plugins- https://gstreamer.freedesktop.org/src/gst-plugins-bad 1.14.4 gst1-plugins- https://gstreamer.freedesktop.org/src/gst-plugins-base base 1.14.4 gst1-plugins- good https://gstreamer.freedesktop.org/src/gst-plugins-good 1.14.4 gst1-vaapi https://gstreamer.freedesktop.org/src/gstreamer-vaapi 1.14.4 gstreamer1 https://gstreamer.freedesktop.org/src/gstreamer 1.14.4 gzip http://ftpmirror.gnu.org/gzip 40e2dcfdf4- e27191d4fb9e- dc6c10337868- https://source.codeaurora.org/quic/la/platform/external/wpa_supplicant_ hostapd b90acf htop http://hisham.hm/htop/releases/2.2.0 2.2.0 https://www.kernel.org/pub/software/utils/i2c-tools i2c-tools http://ibmswtpm.sourceforge.net/ ibmswtpm 4769 http://download.icu-project.org/files/icu4c/60.2...
  • Page 13 SOURCE_SITE PACKAGE VERSION 4f1eef3183df2- b270c3d5cbe- f07343ee5127- https://github.com/robclark/libdri2/archive/ libdri2 a6a4 4f1eef3183df2b270c3d5cbef07343ee5127a6a4 http://dri.freedesktop.org/libdrm libdrm 2.4.97 http://www.thrysoee.dk/editline libedit 20180525-3.1 libepoxy http://ftp.gnome.org/pub/gnome/sources/libepoxy/1.5 1.5.2 http://libestr.adiscon.com/files/download libestr 0.1.10 http://dist.schmorp.de/libev/Attic libev 4.24 http://www.freedesktop.org/software/libevdev libevdev 1.6.0 https://github.com/libevent/libevent/releases/download/release-2.1.8- libevent 2.1.8-stable stable libfastjson https://github.com/rsyslog/libfastjson/archive/v0.99.8 v0.99.8 https://github.com/libffi/libffi/archive/v3.3-rc0 libffi v3.3-rc0 libgcrypt https://gnupg.org/ftp/gcrypt/libgcrypt 1.8.4 libglib2 http://ftp.gnome.org/pub/gnome/sources/glib/2.56...
  • Page 14 SOURCE_SITE PACKAGE VERSION https://raw.githubusercontent.com/wiki/SELinuxProject/selinux/files/ libselinux releases/20180524 https://raw.githubusercontent.com/wiki/SELinuxProject/selinux/files/ libsepol releases/20180524 https://github.com/dottedmag/libsha1/archive/0.3 libsha1 http://www.mega-nerd.com/libsndfile/files libsndfile 1.0.28 http://ftpmirror.gnu.org/libtool libtool 2.4.6 https://github.com/libusb/libusb/releases/download/v1.0.22 libusb 1.0.22 http://downloads.sourceforge.net/project/libusb/libusb-compat-0.1/ libusb-compat libusb-compat-0.1.5 0.1.5 https://github.com/libuv/libuv/archive/v1.25.0 libuv v1.25.0 http://linuxtv.org/downloads/v4l-utils libv4l 1.16.3 https://github.com/intel/libva/releases/download/2.4.0 libva 2.4.0 libvdpau http://people.freedesktop.org/~aplattner/vdpau 1.1.1 http://downloads.xiph.org/releases/vorbis libvorbis 1.3.6 https://github.com/webmproject/libvpx/archive/v1.7.0 libvpx v1.7.0 http://xcb.freedesktop.org/dist...
  • Page 15 SOURCE_SITE PACKAGE VERSION http://ftpmirror.gnu.org/ncurses ncurses http://downloads.sourceforge.net/project/netcat/netcat/0.7.1 netcat 0.7.1 http://downloads.sourceforge.net/project/net-snmp/net-snmp/5.8 netsnmp nodejs http://nodejs.org/dist/v8.15.1 8.15.1 4.2.8p13 https://www.eecis.udel.edu/~ntp/ntp_spool/ntp4/ntp-4.2 opkg http://downloads.yoctoproject.org/releases/opkg 0.3.6 http://downloads.xiph.org/releases/opus opus 1.3.1 http://downloads.xiph.org/releases/opus opusfile 0,11 opus-tools http://downloads.xiph.org/releases/opus parted http://ftpmirror.gnu.org/parted pciutils https://cdn.kernel.org/pub/software/utils/pciutils 3.5.5 pcre2 https://ftp.pcre.org/pub/pcre 10,32 https://ftp.pcre.org/pub/pcre pcre 8.42 http://www.php.net/distributions 7.3.9 pixman http://xorg.freedesktop.org/releases/individual/lib 0.34.0 popt...
  • Page 16 SOURCE_SITE PACKAGE VERSION qt5quickcon- https://download.qt.io/official_releases/qt/5.12/5.12.4/submodules trols 5.12.4 qt5quickcon- https://download.qt.io/official_releases/qt/5.12/5.12.4/submodules trols2 5.12.4 qt5serialport https://download.qt.io/official_releases/qt/5.12/5.12.4/submodules 5.12.4 qt5svg https://download.qt.io/official_releases/qt/5.12/5.12.4/submodules 5.12.4 qt5webchan- https://download.qt.io/official_releases/qt/5.12/5.12.4/submodules 5.12.4 qt5webengine https://download.qt.io/official_releases/qt/5.12/5.12.4/submodules 5.12.4 qt5websock- https://download.qt.io/official_releases/qt/5.12/5.12.4/submodules 5.12.4 qt5x11extras https://download.qt.io/official_releases/qt/5.12/5.12.4/submodules 5.12.4 qt5xmlpatterns 5.12.4 https://download.qt.io/official_releases/qt/5.12/5.12.4/submodules ramspeed http://www.alasir.com/software/ramspeed 2.6.0 http://ftpmirror.gnu.org/readline readline rsync http://rsync.samba.org/ftp/rsync/src 3.1.3 rsyslog http://rsyslog.com/files/download/rsyslog 8.22.0...
  • Page 17 SOURCE_SITE PACKAGE VERSION 40e2dcfdf4- e27191d4fb9e- wpa_ dc6c10337868- https://source.codeaurora.org/quic/la/platform/external/wpa_supplicant_ supplicant b90acf xapp_ beforelight http://xorg.freedesktop.org/releases/individual/app 1.0.5 xapp_xauth http://xorg.freedesktop.org/releases/individual/app 1.0.10 xapp_xclock http://xorg.freedesktop.org/releases/individual/app 1.0.7 xapp_xinit http://xorg.freedesktop.org/releases/individual/app 1.4.0 http://xorg.freedesktop.org/releases/individual/app xapp_xinput 1.6.2 xapp_xinput- http://github.com/downloads/tias/xinput_calibrator calibrator 0.7.5 xapp_ xkbcomp http://xorg.freedesktop.org/releases/individual/app 1.4.2 xapp_xrandr http://xorg.freedesktop.org/releases/individual/app 1.5.0 http://xcb.freedesktop.org/dist xcb-proto 1.13 http://xcb.freedesktop.org/dist xcb-util 0.4.0...
  • Page 18 SOURCE_SITE PACKAGE VERSION xlib_libX11 http://xorg.freedesktop.org/releases/individual/lib 1.6.7 xlib_libXau http://xorg.freedesktop.org/releases/individual/lib 1.0.8 http://xorg.freedesktop.org/releases/individual/lib xlib_libXaw 1.0.13 xlib_ libXcomposite http://xorg.freedesktop.org/releases/individual/lib 0.4.4 xlib_libXcursor 1.1.15 http://xorg.freedesktop.org/releases/individual/lib xlib_ libXdamage http://xorg.freedesktop.org/releases/individual/lib 1.1.4 xlib_libXdmcp http://xorg.freedesktop.org/releases/individual/lib 1.1.3 xlib_libXext http://xorg.freedesktop.org/releases/individual/lib 1.3.3 xlib_libXfixes http://xorg.freedesktop.org/releases/individual/lib 5.0.3 xlib_libXfont2 http://xorg.freedesktop.org/releases/individual/lib 2.0.3 http://xorg.freedesktop.org/releases/individual/lib xlib_libXft 2.3.2 xlib_libXi http://xorg.freedesktop.org/releases/individual/lib 1.7.9 xlib_ http://xorg.freedesktop.org/releases/individual/lib...
  • Page 19 SOURCE_SITE PACKAGE VERSION ftp://ftp.info-zip.org/pub/infozip/src http://www.zlib.net zlib 1.2.11 angular https://github.com/angular/angular.git 7.2.0 bcrypt https://github.com/kelektiv/node.bcrypt.js 3.0.6 bcryptjs https://github.com/dcodeIO/bcrypt.js 2.4.3 body-parser https://github.com/expressjs/body-parser 1.18.3 https://getbootstrap.com/ bootstrap 4.3.1 bunyan https://github.com/trentm/node-bunyan 1.8.12 bunyan- prettystream https://github.com/trentm/node-bunyan 0.1.3 bunyan-syslog https://github.com/trentm/node-bunyan 0.3.2 https://github.com/giggio/node-chromedriver chromedriver 77.0.0 Core-js https://github.com/zloirock/core-js 2.5.4 https://github.com/expressjs/cors cors 2.8.5 https://github.com/sidorares/dbus-native dbus-native...
  • Page 20 SOURCE_SITE PACKAGE VERSION http://typescriptlang.org/ tslib 1.9.0 https://github.com/websockets/ws 7.1.1 zone.js https://github.com/angular/angular 0.8.26 azure-iot-c- https://github.com/Azure/azure-iot-sdk-c/ 0.3.0 https://www.nxp.com/support/developer-resources/software- development-tools/mcuxpresso-software-and-tools/mcuxpresso- software-development-kit-sdk:MCUXpresso-SDK?tab=Design_Tools_ NXP SDK 2.5.0 https://github.com/lz4/lz4/blob/dev/lib/lz4.h unlz4 ring-buff https://code.google.com/archive/p/ring-buff/ wpa_ supplicant http://w1.fi/wpa_supplicant/ EN55032-CISPR32 Class B ITE (Information Technology Equipment) This is a class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
  • Page 21 The radiated output power of the Barco Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Barco Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.
  • Page 22 Informations concernant l'exposition aux fréquences radio (RF) La puissance de sortie émise par l'appareil de sans fil Barco est inférieure à la limite d'exposition aux fréquences radio d'Industry Canada (IC). Utilisez l'appareil de sans fil Barco de façon à minimiser les contacts humains lors du fonctionnement normal.
  • Page 23 Introduction Versions of the product .........................24 About this guide..........................24 Symbols and fonts ........................24 R5900095 /03 CX-50...
  • Page 24: Versions Of The Product

    For more information on the regional variants, refer to the CX-50 Installation Guide. Link between Barco product brand name and the model group CX-50 is a Barco product of the model group C 5010S 1.2 About this guide About the documentation This user guide explains the practical use of the CX-50 .
  • Page 25 Introduction Info, term definition. General info about the term Note: gives extra information about the described subject Tip: gives extra advice about the described subject Font overview • Buttons are indicated in bold, e.g. OK. • Menu items are indicated in italic. •...
  • Page 26 Introduction R5900095 /03 CX-50...
  • Page 27 Introduction to CX- About the CX-50 ...........................28 About the Base Unit ........................29 About the Button...........................30 R5900095 /03 CX-50...
  • Page 28 Introduction to CX-50 2.1 About the CX-50 CX-50 sets With the Conferencing Button, in seconds, you are automatically connected to cameras, mics, soundbars and any other AV peripherals in the room for a better, more immersive meeting experience. Everything becomes part of your laptop.
  • Page 29: About The Base Unit

    Introduction to CX-50 2.2 About the Base Unit Base Unit functionality The Base Unit receives the wireless input from the Buttons and controls the content of the meeting room display and the peripherals connected to the Base Unit (speakers, microphones, webcam and soundbar). Furthermore, it will send out the content from the camera and/or the speakerphone towards the Button.
  • Page 30: About The Button

    Introduction to CX-50 LEDs behavior Explanation red blinking • an error occurred dark • deep standby/off Power button The button at the front of the Base Unit has a standby function once the Base unit is powered. • When the system is in normal operational mode, a push makes the system goes into a pre-defined standby mode.
  • Page 31 Introduction to CX-50 Explanation LEDs behavior white ring filling up • Button is plugged in the laptop and initializing. • Button is updating/pairing green ring • pairing and software update is done. You can now unplug the Button from the Base Unit. spinning white circle •...
  • Page 32 Introduction to CX-50 R5900095 /03 CX-50...
  • Page 33 Getting started Activating the base unit .........................34 Basic Use, with Button ........................34 Basic Use, with ClickShare desktop app ..................36 User Interface ..........................38 Extended desktop.........................38 Share an application ........................40 Audio configuration ........................41 Pairing ............................42 Touch Back ..........................43 3.10 Room Dock ..........................44 3.11 Airplay ............................44 3.12 Chromecast ..........................44 3.13 Miracast............................44...
  • Page 34: Activating The Base Unit

    To start using CX-50 with a Button Take a Button and Insert the Button into a USB port of your laptop. Depending on the USB port on your laptop a convertor must be used. This convertor is not delivered by Barco. Image 3-2...
  • Page 35 • A launcher or the ClickShare desktop app is preinstalled on your laptop (downloaded from the Base Unit or Barco website, or deployed company-wide by your IT department). ClickShare is immediately available. You can continue with go to step 3.
  • Page 36 Getting started As second user can replace the current presenter with a long press on his Button. Quick access button This quick access button opens a selection window to make the choice what will be displayed on the screen. Image 3-5 The choices are: •...
  • Page 37 Getting started Image 3-6: Meeting room list If the use of a passcode is enabled on the base unit, the ClickShare desktop app will prompt you to enter the passcode that is shown on the meeting room screen. Image 3-7: Enter passcode After having entered the passcode, the ClickShare desktop app will connect to the meeting room.
  • Page 38: User Interface

    ClickShare. That extended screen can be a physical screen or a virtual screen. To use extended desktop, the extension pack is required. It can be downloaded from https://www.barco.com/en/product/clickshare-extension-pack. With extended desktop you can take advantage of both your laptop screen and the central meeting room display.
  • Page 39 Getting started Image 3-13 Primary screen displayed on the PC, extended screen displayed on the meeting room display. Image 3-14 PC with one extended screen connected. That extended screen will be captured and displayed on the meeting room display. Image 3-15 PC with two extended screens connected.
  • Page 40 Getting started Image 3-16 The content menu opens. Check the check box before Extended desktop. 3.6 Share an application About sharing an application When Share an application is selected, you will be presented with an overview of open applications on your computer.
  • Page 41: Audio Configuration

    Getting started Image 3-19 The selection menu is displayed. To display an application, select Share an Application. The last 6 open applications on your computer are displayed. Image 3-20 Hoover your mouse over the application to share. That window becomes blue. Click on that application to select.
  • Page 42 Getting started Image 3-21: Audio setup 3.8 Pairing Pairing of the Buttons with the Base Unit To be able to use a Button it should be assigned to the Base Unit you are using. This process is called pairing. All Buttons will need to be updated and paired before use. In case you buy additional Buttons or when a Button should be assigned to another Base Unit, the Button needs to be paired (again).
  • Page 43 Getting started Image 3-22: Pair button The Base Unit LED is blinking while the Button LED fills up a circle. This means pairing is in progress. The Base Unit automatically checks whether the software of the Button is up to date. If not, the Base Unit updates the Button software.
  • Page 44 Getting started 3.10 Room Dock About Room Dock allows to create a wireless bridge for echo-cancelling speakphone and USB camera attached to the Base Unit. This allows the user to take advantage of the installed meeting room peripherals to have better audio and video conferencing using their typical videoconferencing tools like Skype or Zoom.
  • Page 45 Getting started How to use Miracast Miracast should be enable on the ClickShare Base Unit. Your mobile device needs to be Miracast enabled. Devices like Samsung smartphones or other Android phones, as well as devices that use Windows 8 or 10, typically have the technology built-in. In the settings of your mobile device, open ‘wireless display’...
  • Page 46 Getting started R5900095 /03 CX-50...
  • Page 47: Troubleshooting

    Troubleshooting R5900095 /03 CX-50...
  • Page 48: Basic Troubleshooting

    Troubleshooting 4.1 Basic troubleshooting Problem solving In this chapter some problems that might occur while using CX-50 are listed. For each problem possible causes are given and a solution is proposed. If you cannot solve the problem yourself, please contact your local IT administrator.
  • Page 49 Troubleshooting Problem Cause Solution The display does not recognize or You or an administrator should is not able to display the Base Unit change the corresponding setting output resolution. via the web interface. The Base Unit is in standby mode. Briefly push the standby button on the Base Unit or plug in a Button and run the ClickShare client...
  • Page 50 Troubleshooting Problem Cause Solution Windows tries to assign the Use Microsoft Windows Disk ClickShare drive to an already Management to assign it to a free reserved drive letter drive letter. Bad block on the mass storage Please re-pair the Button with the Base Unit to restore the flash I cannot start the ClickShare App Running 3rd party applications is...
  • Page 51 In order to have a second screen on your computer when using ClickShare, you will need to download and install the ClickShare extension pack. barco.com/clickshare/ extensionpack Old Extension pack installed ClickShare will only work with the latest version of the Extension Pack.
  • Page 52 Troubleshooting Problem Cause Solution ClickShare audio device is visible, Audio output of the Button is not In Windows, left click on the but sound is coming out of my own selected. speaker icon and select the device or other audio device ClickShare Speaker.
  • Page 53: Environmental Information

    Environmental information R5900095 /03 CX-50...
  • Page 54: Disposal Information

    Electronic Products” (Also called RoHS of Chinese Mainland), the table below lists the names and contents of toxic and/or hazardous substances that Barco’s product may contain. The RoHS of Chinese Mainland is included in the MCV standard of the Ministry of Information Industry of China, in the section “Limit Requirements of toxic substances in Electronic Information Products”.
  • Page 55 Mainland, marked with the Environmental Friendly Use Period (EFUP) logo. The number inside the EFUP logo that Barco uses (please refer to the photo) is based on the “General guidelines of environment-friendly use period of electronic information products” of Chinese Mainland.
  • Page 56: Production Address

    The month and year of production is indicated on the product ID label on the product itself. 5.4 Importers contact information Contact To find your local importer, contact Barco directly or one of Barco's regional offices via the contact information given on Barco's web site, www.barco.com. R5900095 /03...
  • Page 57 Environmental information R5900095 /03 CX-50...
  • Page 58 R5900095 /03 | 2020-03-12 Barco NV | Beneluxpark 21, 8500 Kortrijk, Belgium Registered office: Barco NV | President Kennedypark 35, 8500 Kortrijk, Belgium www.barco.com...

This manual is also suitable for:

Cx-50R9861600d01c

Table of Contents