How to start up for EAP-TLS
1.
Select EAP-TLS from the drop down list next to Authentication Mode.
Image 6–21 Wi-Fi Settings, Wireless Client, EAP-TLS
2.
Fill out a Corporate SSID.
The SSID of your corporate wireless infrastructure to which the ClickShare Buttons will connect.
3.
Fill out the Domain and Identity.
4.
Select the certification method. Click on the drop down box and select the desired method.
•
Manually provide Client & CA certificates
•
Auto enrollment via SCEP
Manually providing certificates
1.
Upload client certificate. Click on Choose file and browse to the desired file.
Allowed file formats:
•
.pfx (PKCS#12)
•
.p12 (Base64 encoded DER)
The should at least include the client certificate and corresponding private key.
2.
Enter the Client certificate Password.
3.
Upload CA certificate. Click on Choose file and browse to the desired file.
The following formats are allowed:
•
.pem
•
.cer
CX-50 Gen2 Configurator
R5900120 /01
CX-50 Gen2
85