Barco CX-50 Gen2 Installation Manual page 47

Image 4–16
When connected to the internet you can select Automatic for firmware update (recommended). If you set it
on No, you still have the choice to manually update by downloading the software on an USB stick.
When connected to the internet and the setting is set to Automatic, the software check will be done and
the latest version will be downloaded but the update of the firmware will be executed only when finishing
the configuration wizard.
For more info about automatic firmware update, see
Click Next to continue to the next page and Back to return to the previous page.
4. Personalisation step.
Image 4–17
Enter the on screen language you want to use. For more info, see
Enter the meeting room name, location name and welcome message. For more info, see
information", page 72.
5. System settings
"Firmware Update", page
"On-Screen ID information", page
R5900120 /01
CX-50 Gen2 Installation
114.
72.
"On-Screen ID
CX-50 Gen2 47