Barco CX-50 Gen2 Installation Manual page 93

Image 6–30 EAP-TLS
2. Fill out the Domain and Identity.
3. Select the certification method. Click on the drop down box and select the desired method.
• Manually provide Client & CA certificates
• Auto enrollment via SCEP
Manually providing certificates
1. Upload client certificate. Click on Choose file and browse to the desired file.
Allowed file formats:
• .pfx (PKCS#12)
• .p12 (Base64 encoded DER)
The should at least include the client certificate and corresponding private key.
2. Enter the Client certificate Password.
3. Upload CA certificate. Click on Choose file and browse to the desired file.
The following formats are allowed:
• .pem
• .cer
• .crt
• .pb7 (Base64 encoded DER)
File should at least contain the root CA certificate for your domain.
4. Save configuration
Using Auto enrollment
The Simple Certificate Enrolment Protocol (SCEP) is a protocol which enables issuing and revoking of
certificates in a scalable way. SCEP support is included to allow a quicker and smoother integration of the
ClickShare Base Unit and Buttons into the corporate network.
Up until Base Unit firmware version 02.11.01 the SCEP implementation was specifically targeted at the
Network Device enrollment Service (NDES) which is part of Windows Server. From Base Unit firmware
version 02.12.00 and later we support both NDES and standard SCEP.
NDES requires the following parameters:
CX-50 Gen2 Configurator
R5900120 /01 CX-50 Gen2 93