Start Up Without Configuration; Registration To Xms Cloud - Barco CX-50 Gen2 Installation Manual

Image 4–24

4.22 Start up without configuration

How to start
1. Plug in a Button and start sharing your screen.
As soon as a user connects to the Base Unit, the default wallpaper will be shown on the meeting room
display and the unit can be used with it's default configuration. However, as long as the Configuration
Wizard has not been completed, the initial startup screen will again be shown at each reboot of the device.
Registration of the device is only possible in the Configuration Wizard or from the ClickShare Configurator
and when the Base Unit is connected to the internet.

4.23 Registration to XMS Cloud

About registration
When your device is connected to the internet and updated you can start to register your device. You have to
register your device in order to claim your 5 years SmartCare package.
This SmartCare package includes:
• 5-year coverage for hardware
• Increased service levels
• XMS for management
• 5-year analytics management
More info can be found on
Registration can be done to
• XMS cloud by the end customer (preferred flow) or by the reseller in the name of the customer.
Online to XMS cloud
1. Surf to https://xms.cloud.barco.com/add.
The XMS login page is displayed.
2. Enter your Email address and click Continue.
https://www.barco.com/en/clickshare/apps-accessories/smartcare
CX-50 Gen2 Installation
.
R5900120 /01 CX-50 Gen2 51