Network Connected Setup - Barco CX-50 Gen2 Installation Manual

CX-50 Gen2 Installation
Sender/Receiver
Miracast MS-MICE
ClickShare Configurator
XMS Cloud
XMS Edge
Auto-update
Button Manager
SNMP
REST API

4.7 Network connected setup

Overview
This is the simplest installation which offers a seamless experience for employees and is the recommended
setup for temporary setups, visitors' centers, small to medium installations without network integration needs,
for internal meeting rooms, for companies with a flat network topology or when the ClickShare Button will be
the main way for people to the system.
In this default mode, ClickShare Buttons and Base Units operate directly out of the box (Buttons must be
paired to the Base Unit before they can be used) and users can share to the Base Unit with the ClickShare
Desktop App, the ClickShare Mobile App, AirPlay, Google Cast via the network to which the Base Unit is
connected without losing the internet connectivity. Sharing via Miracast depends on the configuration of the
device.
Using a ClickShare Button allows guests to stay connected to the Guest LAN and thus retain internet
connectivity. Guest mobile devices will usually need to connect to the Base Unit directly and will only be able
to access the internet if the device supports to use data (3G/4G) at the same time.
Image 4–3
5. Google Cast will pick a random UDP port above 32768 to facilitate video streaming.
34 R5900120 /01 CX-50 Gen2
UDP
TCP
UDP
TCP
UDP
TCP
TCP
TCP
UDP
TCP
UDP
TCP
CX range
1900, 5353, 32768, 61000
7236, 7250
7236
80, 443
n/a
443
4003
80, 443
n/a
6546
161 and 162
4003
5