Page 3
Barco. If the purchaser or a third party carries out modifications or repairs on goods delivered by Barco, or if the goods are handled incorrectly, in particular if the systems are operated incorrectly or if, after the transfer of risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid.
Page 4
ClickShare applications (each a “Barco ClickShare Product”). • Term The Software can be used under the terms of this EULA from the date of first use of the Barco ClickShare Product, for as long as you operate such Barco ClickShare Product. •...
Page 5
• Retention of data Barco right to use and retain Functional Information (section 10.2 of the EULA) shall survive the term of this EULA. BARCO END USER LICENSE AGREEMENT By accepting these terms (through tick box or other mechanism designed to acknowledge agreement to the...
Page 6
You may own the carrier on which the Software is provided, but the Software is owned and copyrighted by Barco or by third party suppliers. Your license confers no title or ownership and is not a sale of any rights in the...
Page 7
Software. You agree to install any maintenance releases to address bugs or security issues in the Software if the same are being provided to you. Barco will keep you informed as of when earlier versions of the Software are no longer serviced.
Page 8
6.4 ‘Remedy’. If the breach is not cured within the applicable remedy period (or cannot be cured at all), Barco shall have the option (i) to cause you to procure such additional licenses required as per the actual usage;...
Page 9
(especially for components that you provide or control). Barco disclaims any liability for any data not provided by Barco, or any use of the Software outside the intended use as per this License Agreement or an applicable data processing annex.
Page 10
( http://www.barco.com/en/about-barco/legal/privacy-policy/clickshare-app). Via the Software, Barco may gather technical information about (i) the functioning and the functionality of the products which are connected through the Software, and/or (ii) as provided by you or generated by your use of the Software (“Functional Information”).
The radiated output power of the Barco Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Barco Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.
Informations concernant l'exposition aux fréquences radio (RF) La puissance de sortie émise par l'appareil de sans fil Barco est inférieure à la limite d'exposition aux fréquences radio d'Industry Canada (IC). Utilisez l'appareil de sans fil Barco de façon à minimiser les contacts humains lors du fonctionnement normal.
Page 23
Introduction Versions of the product .........................24 About this guide..........................24 Symbols and fonts ........................24 R5900095 /05 CX-50...
For more information on the regional variants, refer to the CX-50 Installation Guide. Link between Barco product brand name and the model group CX-50 is a Barco product of the model group C 5010S 1.2 About this guide About the documentation This user guide explains the practical use of the CX-50 .
Page 25
Introduction Info, term definition. General info about the term Note: gives extra information about the described subject Tip: gives extra advice about the described subject Font overview • Buttons are indicated in bold, e.g. OK. • Menu items are indicated in italic. •...
Page 27
Introduction to CX- About the CX-50 ...........................28 About the Base Unit ........................29 About the Button...........................30 R5900095 /05 CX-50...
Introduction to CX-50 2.1 About the CX-50 CX-50 sets With the Conferencing Button, in seconds, you are automatically connected to cameras, mics, soundbars and any other AV peripherals in the room for a better, more immersive meeting experience. Everything becomes part of your laptop.
Introduction to CX-50 2.2 About the Base Unit Base Unit functionality The Base Unit receives the wireless input from the Buttons and controls the content of the meeting room display and the peripherals connected to the Base Unit (speakers, microphones, webcam and soundbar). Furthermore, it will send out the content from the camera and/or the speakerphone towards the Button.
Introduction to CX-50 LEDs behavior Explanation red blinking • an error occurred dark • deep standby/off Power button The button at the front of the Base Unit has a standby function once the Base Unit is powered. • When the system is in normal operational mode, a push makes the system goes into a pre-defined standby mode.
Page 31
Introduction to CX-50 Explanation LEDs behavior white ring filling up • Button is plugged in the laptop and initializing. • Button is updating/pairing green ring • pairing and software update is done. You can now unplug the Button from the Base Unit. spinning white circle •...
Page 32
Introduction to CX-50 R5900095 /05 CX-50...
Page 33
Getting started Activating the Base Unit ........................34 Basic Use, with Button ........................34 Basic Use, with ClickShare desktop app ..................37 User Interface ..........................40 Extended desktop.........................41 Share an application ........................42 Microsoft Office PowerPoint Presenter mode ..................44 View room display ........................44 Stop sharing and leave .........................45 3.10 Audio configuration ........................45 3.11 Pairing ............................46 3.12 Touch Back ..........................47...
To start using CX-50 with a Button Take a Button and insert the Button into a USB port of your laptop. Depending on the USB port on your laptop a convertor must be used. This convertor is not delivered by Barco. Image 3–2...
Page 35
• A launcher or the ClickShare desktop app is preinstalled on your laptop (downloaded from the Base Unit or Barco website, or deployed company-wide by your IT department). ClickShare is immediately available. You can continue with go to step 2.
Page 36
Getting started Image 3–4 To remove your content from the display, click the Button again. The LEDs of the Button become static white. When leaving the meeting room, unplug the Button from your laptop. No trace of the ClickShare application is left on your laptop. As second user can replace the current presenter with a long press on his Button.
Page 37
Getting started Image 3–6 Examples of some choices are: • View the room display • Start video • Mute micro 3.3 Basic Use, with ClickShare desktop app About the ClickShare desktop app With the ClickShare desktop app installed on your computer you can enter a meeting room and get on the screen in a few seconds.
Page 38
Getting started Image 3–7 Meeting room list If the use of a pin is enabled on the Base Unit, the ClickShare desktop app will prompt you to enter the pin that is shown on the meeting room screen. Enabling the pin on the Base Unit (this can be done in the ClickShare Configurator) provides an additional layer of security.
Page 39
Getting started Image 3–11 Stop sharing by hovering over circle and clicking on the full red circle. Image 3–12 Disconnect from the meeting room by clicking the “leave room” icon Image 3–13 Leave meeting room when you walk away from the meeting room the app will show a message indicating you probably left the meeting room and you are still connected to the screen.
Getting started Image 3–14 Conference room message Limitations when not using the ClickShare Button to connect: When connected using the ClickShare Desktop App, without the ClickShare Button plugged-in, your experience is limited to the collaboration capabilities available on ClickShare. You will not be able to use the room camera, room speakers, microphone or speakerphone for wireless conferencing until a ClickShare Button is plugged-in.
The use of the extended desktop functionality does require the extension pack to be installed on your device. More information on the extension pack can be found on the ClickShare Extension pack product page ( https://www.barco.com/en/product/clickshare-extension-pack). With extended desktop you can take advantage of both your laptop screen and the central meeting room display.
Getting started Image 3–19 PC with two extended screens connected. The first extended screen, screen 2 will always be captured and displayed on the meeting room display. How to select Click on the menu icon of the Ready to share message. Image 3–20 The content menu opens.
Page 43
Getting started Image 3–22 Hoover your mouse over the application to share. That window becomes blue. Click on that application to select. Only the selected application is shared on the meeting room display. Via the Quick access button Push the quick access button and click on the share an application icon. Image 3–23 To display an application, select Share an Application.
Page 44
Getting started Click on that application to select. Only the selected application is shared on the meeting room display. 3.7 Microsoft Office PowerPoint Presenter mode Overview To view your speaker notes on your pc when sharing a presentation on the room display, one can make use of the PowerPoint Presenter mode functionality in Microsoft Office PowerPoint without the need for a second (virtual) display.
Getting started How to view With a Button plugged in or the ClickShare desktop app ready, click on the hamburger menu and select View room display. Image 3–26 The content of the meeting room display is transferred to a new window on your laptop. A red eye will be shown at the bottom left on the meeting room display splash screen.
Page 46
Getting started The speakerphone is available and can be used even when not on screen. The sound coming out of the speaker is only heard when sharing content. With this defaults, the content audio will be played by the speakers and communication clients (UC&C and conferencing tools) will use the room speakerphone. For best experience, the room speakerphone should be selected in the communications client at all times.
Page 47
Getting started Image 3–30 Pair Button The Base Unit LED is blinking while the Button LED fills up a circle. This means pairing is in progress. The Base Unit automatically checks whether the software of the Button is up to date. If not, the Base Unit updates the Button software.
Page 48
Getting started • A supported touch panel display. A list of supported displays is listed on Barco’s website in “The ClickShare Supported Touch Panels Whitepaper”. How to use Touch Back • Tap once to control your laptop instead of using the computer mouse.
Page 49
Getting started How to use Chromecast 1. Make sure your device is connected with the ClickShare WiFi in the meeting room. 2. Click on the cast-icon to display the content of you device on the meeting room screen. For more information about using Chromecast with a typical device, consult the user manual of that device. 3.16 Miracast About Miracast Miracast enables seamless display of multimedia content between Miracast devices.
Troubleshooting 4.1 Basic troubleshooting Problem solving In this chapter some problems that might occur while using CX-50 are listed. For each problem possible causes are given and a solution is proposed. If you cannot solve the problem yourself, please contact your local IT administrator.
Page 53
Troubleshooting Problem Cause Solution The display does not recognize or You or an administrator should is not able to display the Base Unit change the corresponding setting output resolution. via the web interface. The Base Unit is in standby mode. Briefly push the standby button on the Base Unit or plug in a Button and run the ClickShare client...
Page 54
Troubleshooting Problem Cause Solution Windows tries to assign the Use Microsoft Windows Disk ClickShare drive to an already Management to assign it to a free reserved drive letter drive letter. Bad block on the mass storage Please re-pair the Button with the Base Unit to restore the flash I cannot start the ClickShare App Running 3rd party applications is...
Page 55
In order to have a second screen on your computer when using ClickShare, you will need to download and install the ClickShare extension pack. barco.com/clickshare/ extensionpack Old Extension pack installed ClickShare will only work with the latest version of the Extension Pack.
Page 56
Troubleshooting Problem Cause Solution changing audio settings on my Base Unit. ClickShare audio device is visible, Audio output of the Button is not In Windows, left click on the but sound is coming out of my own selected. speaker icon and select the device or other audio device ClickShare Speaker.
Electronic Products” (Also called RoHS of Chinese Mainland), the table below lists the names and contents of toxic and/or hazardous substances that Barco’s product may contain. The RoHS of Chinese Mainland is included in the MCV standard of the Ministry of Information Industry of China, in the section “Limit Requirements of toxic substances in Electronic Information Products”.
Page 59
Mainland, marked with the Environmental Friendly Use Period (EFUP) logo. The number inside the EFUP logo that Barco uses (please refer to the photo) is based on the “General guidelines of environment-friendly use period of electronic information products” of Chinese Mainland.
The month and year of production is indicated on the product ID label on the product itself. 5.4 Importers contact information Contact To find your local importer, contact Barco directly or one of Barco's regional offices via the contact information given on Barco's web site, www.barco.com. R5900095 /05...
Need help?
Do you have a question about the C 5010S and is the answer not in the manual?
Questions and answers