About The Base Unit - Barco CX-50 Gen2 Installation Manual

2.3 About the Base Unit

Base Unit
The Base Unit receives the wireless input from the conferencing Buttons and controls the content of
the meeting room display. Furthermore, a touch screen, USB camera and USB speakerphone can
be connected to the Base Unit.
Base Unit functionality
The Base Unit receives the wireless input from the Buttons and controls the content of the meeting room
display and the peripherals connected to the Base Unit (speakers, microphones, webcam and soundbar).
Furthermore, it will send out the content from the camera and/or the speakerphone towards the Button.
The Base Unit can be inside a cabinet in the meeting room, or put on the meeting room table or mounted on a
wall. Check the Installation Guide for instructions on how to install the Base Unit.
1
2
Image 2–2
Image 2–3
1 USB Type-C TM port
2 Status LED ring
3 Standby Button
4 LAN input
5 HDMI out
6 2x USB Type-A port
7 USB Type-C TM port
8 19V DC input
USB Type-A Port
The USB port is used to update the software of both the Base Unit and the Buttons and to connect a touch
screen, USB camera or USB echo-cancelling speakerphone to the Base Unit.
3
CX-50 Gen2 Specifications
R5900120 /01 CX-50 Gen2 21