Wifi Settings - Barco ClickShare CX-20 set Gen 2 Installation Manual

CX-20 Configurator
Screen saver setup
1. Log in to the Configurator.
Image 6-15
2. Click Display & Audio → Display & Audio.
3. To activate the screen saver, drag the slider bar to the left or to the right until the desired delay time is reached.
When the slider is set completely to the left, the screen saver will never be activated.
4. Click Save changes.

6.9 WiFi settings

WARNING: It is not allowed to operate the Base Unit outside its intended geographical region.
About WiFi
A connection with the Base Unit can be made via a wireless connection. A fixed wireless IP address is used to
establish the connection.
The transmission power of the wireless signal can be reduced.
An overview of the current settings is given when Wi-Fi Settings is selected and operational mode is Access
Point.
68 R5900102 /00 CX-20