Table of Contents
Advertisement
3.2.2 Digital O utput Unit (DVI)
There are three different types of output units for connecting to the projection modules of an
O
V
or A
Display Wall: digital output unit DVI, digital output unit MDR26 and ana-
VER
IEW
TLAS
log output unit.
To connect to digital projection modules the digital output unit DVI can be used.
Within a Visu
inserted into the output unit of Visu
Each of these output units provides the facility for connecting one projection module.
Digital and analog output units may not be mixed within one Visu
multiple Visu
connector and with MDR26 connector can be used in the same device.
Furthermore in a V
ISU
DDC information from the display device to the E
Connectors
The digital output unit has two connectors. The
channel of E
within a V
OS
module.
1
In
2
Out
Cable
The DVI-D to DVI-D cable is used to connect the
(DVI) with a digital projection module, see figure below.
R5976214
VisuPlus Video Insertion Unit
Download from Www.Somanuals.com. All Manuals Search And Download.
Plus
– Eos configuration the graphical information of Eos is also
Plus
in the same chain! Nevertheless digital output units with DVI
P
LUS
- E
configuration the digital output unit DVI is able to loop through
OS
In
P
LUS
– E
Setup. The
ISU
OS
1
June 2003
Plus
.
.
OS
connector [
] is to connect to a digital graphic
1
connector [
] is to connect to the projection
Out
2
2
connector
of the digital output unit
Out
[2]
Plus
or within
Figure 3-4
digital output unit (DVI)
Figure 3-5
DVI-D to DVI-D cable
3-6
Advertisement
Table of Contents
