About The Base Unit - Barco CX-50 Installation Manual

CX-50 Specifications
Touch screen support &
Interactivity
Room Dock (peripheral
support)
Local view & moderation
Network connection
Management and reporting
Warranty
*

2.3 About the Base Unit

Base Unit
The Base Unit receives the wireless input from the Buttons and controls the content of the meeting
room display. Furthermore, a touch screen, USB camera and USB speakerphone can be connected
to the Base Unit.
The Base Unit can be installed in two different ways.
Base Unit functionality
The Base Unit receives the wireless input from the Buttons and controls the content of the meeting room
display and the sound of the meeting room's audio system. Furthermore, it will send out the content from the
camera and/or the speakerphone towards the Button.
The Base Unit can be inside a cabinet in the meeting room, or put on the meeting room table or mounted on a
wall. Check the Installation Guide for instructions on how to install the Base Unit.
1
Image 2-2
1 USB Type-A port
2 Status LED ring
3 Standby Button
USB Port
The USB port is used to pair the Button to the Base Unit and to update the software of both the Base Unit and
the Buttons and to connect a touch screen, USB camera or USB speakerphone to the Base Unit.
When plugging in the Button into the Base Unit, the Button is paired to the Base Unit. The Base Unit checks
whether the software and firmware of the Button is up to date. If not, the Base Unit updates the software and/
or firmware.
Use a convertor to connect a Button with an USB Type-C
Type-C TM port available at the backside.
26 R5900096 /00 CX-50
Yes*
High quality
High quality*
LAN & WiFi (dual)*
Yes
1 year standard. 5 years coverage via SmartCare
* available in future firmware updates
2
3
TM connector to front USB port of the Base Unit. USB