Installation; Installation Methods For The Base Unit; Guidelines For Clickshare Conference System Installation - Barco CX-20 Installation Manual

CX-20 Installation

4.1 Installation methods for the Base Unit

For optimal performance, install the Base Unit close to the display and avoid obstacles between the
Base Unit and the Buttons.
Make sure not to install the Base Unit in a metal enclosure.
Physical installation
The Base Unit can be installed in different ways in a meeting room.
• Table mount
• Wall mount
• Ceiling mount
Standalone or network integration
The Base Unit can be use as standalone unit or integrated in a corporate network.
• Out-of-the-box use
• Out-of-the-box use with Ethernet link
Conferencing room setup
• Full conferencing room setup
• Audio only conferencing room setup
• Video only conferencing room setup
4.2 Guidelines for ClickShare Conference system

installation

Overview
• Keep your Base Unit up to date. For an optimal experience and to assure the security of the overall system
free updates are multiple times available.
• It is recommended to connect the Base Unit to the network (wired Ethernet connection or wireless
connection).
• It is recommended to use a direct connection between the Conferencing Button and the Base Unit for high
quality and low latency wireless conferencing.
• Place the Base Unit in an open emplacement and avoid installing a metallic shell.
• For an optimal user experience, both ClickShare and custom services such as AirPlay or Miracast, have
implemented different ways to do presence and proximity detection. To take full advantage of these
mechanisms, we strongly advise to install the ClickShare Base Unit in the room, physically close to the
display and not in a closed cabinet.
• Always connect your camera and/or audio device via USB to the Base Unit.
4.3 Table mounting
Overview
Put the Base Unit directly on the meeting room table.
The total weight of the Base Unit is 530 g.
30 R5900102 /02 CX-20