Gatekeeper - Polycom ViewStation EX User Manual

Chapter 2
ViewStation User Guide
Note The gateway places calls if the bandwidth number
corresponds to the correct line speed. For example:
An invalid speed is 255. Valid bandwidth speeds are listed
on the Gateway screen shown in Figure 2-39. The Gateway
rejects and invalid speed and does not connect the call.
Note The Gateway configuration has no effect if a gatekeeper or
gateway is not used.

Gatekeeper

The Gatekeeper screen (System Info > Admin Setup >
LAN/H.323 > Gatekeeper) shown in Figure 2-40 is used to enable,
disable, or configure an H.323 gatekeeper.
Off: The gatekeeper is not used. The Gatekeeper IP Address
text field is not accessible.
Specify: The gatekeeper is used. Enter the gatekeeper IP
address in the grey text box. Contact the LAN manager to obtain
the gatekeeper IP address.
Auto: When set to Auto the ViewStation automatically searches
for the presence of an available gatekeeper. If a gatekeeper is not
used and Auto has been selected, the ViewStation remains in
Auto mode until changed.
Figure 2-39. Gateway Screen
70
Optional Configurations
www.polycom.com