Polycom ViewStation EX User Manual page 68

Chapter 2
ViewStation User Guide
DCP Video Network
The DCP Video Network screen (System Info > Admin Setup >
Video Network > DCP Video Network) contains information
entered during system setup. The five user-configurable fields are:
Country Code: Choose the Country Code associated with the
country where the ViewStation is used.
Area Code: Choose the Area Code or STD Code where the
ViewStation is used.
Number A: Enter the primary DCP number assigned to the
ViewStation.
Number B: Enter the secondary DCP number assigned to the
ViewStation.
DCP Switch Protocol: Select the appropriate DCP switch
protocols. Contact the DCP provider to determine the DCP switch
protocol.
DCP Dialing Prefix: The DCP dialing prefix is used to access an
outside line if the ViewStation is connected to a PBX.
Figure 2-22. DCP Video Network Screen
52
Optional Configurations
www.polycom.com