Viewstation 128 - Polycom ViewStation EX User Manual

Chapter 2
ViewStation User Guide
Not Checked: The E.164 Dialing Extension is not
displayed when a video call is initiated in H.323 calls.
Multi-Point Setup (MP Enabled ViewStations only)
The Multi-Point setup screen determines which mode the
multi-point is used in. These modes are:
• Auto: The ViewStation automatically switches between
discussion and presentation modes.
• Discussion: This mode is also called the continuous
presence. Each site remains on the screen in a tiled
arrangement.
• Presentation: The main presenter remains on the screen.
Full Screen: Whoever is speaking is viewed in full screen.
When a new endpoint speaks, that endpoint appears full
screen.

ViewStation 128

The Network Setup screen (System Info > Admin Setup > Video
Network) shown in Figure 2-24 provides three icons, which:
• Set Dialing Speeds
• Configure Video Network properties
• Set Call Preferences
Figure 2-24. ViewStation 128 ISDN Network Setup Screen
54
Optional Configurations
www.polycom.com